Laying a block of paving stone is not an easy job. A lot of people would rather hire a contractor to do the job for them. Though, there are some homeowners who would prefer to do it by themselves. If you decide to do this job by yourself, it is vitally important that you need to follow the step by step procedure correctly. This is to ensure that your block paving looks artistically attractive.
You must need to build a firm lay of the paving block. So, it can withstand against the harmful external elements. In addition, you need to make sure that the block paving you laid is a safe surface. Fortunately, there are handy guides to aid you in laying the most stunning and functional block paving as possible.
Gather All the Materials and Supplies Needed: This is basically the first thing that you need to do. You need to collect all the materials and supplies that you in laying the paving stone. There are several things that you need to have and do in laying paving blocks.
The most important material that you need for the paving block is the stones. Most of the homeowners use sandstone and granite to lay a paving block. However, there are different lines of stones that you can use in creating your paving.
Start the Block Paving Steps: When you are done gathering all materials and supplies, it is now time for you to begin working in the area. Make sure that everything is cleared out, which includes debris and other unnecessary particles, so you can start to set the sub base.
The latter is normally made of immensely fine gravel. However, others use sand for their sub base. Set the sub base up around 70-80 mm deep. In this way, you are secure that the ground is well-protected from the dirt below the sub base.
Time to Begin Fully Laying the Path: After the 72-hour timeframe that you need to wait, now it is time for you to begin fully laying the path. Take your stone blocks and place them on the sub base according to the pattern you like.